loading
Zurück
  • GB-S10 2TN Sheffield
  • 27.10.2014
  • Ausschreibung
  • (ID 2-182339)

213/MR Appointment of Mechanical Engineer for CHP scheme at the University of Sheffield

 
  • Projektdaten

    maximieren

    Bewerbungsschluss 28.10.2014, 12:00 Bewerbungsschluss
    Schlusstermin für Unterlagen 27.10.2014
    Verfahren Nicht offenes Verfahren
    Gebäudetyp Hochschulen, Wissenschaft und Forschung
    Art der Leistung Technische Ausrüstung
    Sprache Englisch
    Aufgabe
    The University of Sheffield is installing a CHP system, and requires the services of a Mechanical Engineer who will act as lead on this prestigious project.
    This procurement is being advertised under the Accelerated Restricted procedure. This is a two part process with a 10 day pre-qualification questionnaire (PQQ) stage, followed by a 10 day ITT (invitation to tender) stage. Potential suppliers are invited to express an interest in the project and submit their PQQ submission. If they are successful at PQQ stage they will be invited to tender.
    The full technical specification will be available in the Invitation to tender documents that will be sent to you if you are successful in passing the pre-qualification stage. There is no obligation to tender if you subsequently find that you are unable to meet the full specification.
    Expressions of interest can only be accepted through the University's e-tendering system https://in-tendhost.co.uk/SheffieldThe closing date for return of PQQ documents is 28.10.2014 at 12:00 noon (UK time) through the in-tend system.
    Any questions in relation to this tendering exercise must only be raised via the Intend system.
    Leistungsumfang
    Appointment for Mechanical Engineer to design and oversee installation of CHP scheme.
    Adresse des Bauherren UK-S10 2TN Sheffield
    TED Dokumenten-Nr. 359638-2014

  • Anzeigentext Ausschreibung

    maximieren


    • Auftragsbekanntmachung

      Dienstleistungen
      Richtlinie 2004/18/EG

      Abschnitt I: Öffentlicher Auftraggeber

      I.1) Name, Adressen und Kontaktstelle(n)
      University of Sheffield
      Floor 5, The Arts Tower, Western Bank
      https://in-tendhost.co.uk/sheffield
      Zu Händen von: Mark Richards
      S10 2TN
      Sheffield
      VEREINIGTES KÖNIGREICH
      +44 1142224204
      MjE0XyBkW1VaU2RWZTJlWldYWFtXXlYgU1UgZ10=

      Internet-Adresse(n):


      Hauptadresse des öffentlichen Auftraggebers: www.sheffield.ac.uk
      Adresse des Beschafferprofils: https://in-tendhost.co.uk/sheffield
      Weitere Auskünfte erteilen:
      die oben genannten Kontaktstellen

      Ausschreibungs- und ergänzende Unterlagen (einschließlich Unterlagen für den wettbewerblichen Dialog und ein dynamisches Beschaffungssystem) verschicken:
      die oben genannten Kontaktstellen

      Angebote oder Teilnahmeanträge sind zu richten an:
      die oben genannten Kontaktstellen

      Abschnitt II: Auftragsgegenstand

      II.1) Beschreibung

      II.1.6) Gemeinsames Vokabular für öffentliche Aufträge (CPV)
      71333000 - KA01, 09323000

      Beschreibung
      Dienstleistungen im Maschinenbau.
      Fernwärme.

      Abschnitt IV: Verfahren

      IV.3) Verwaltungsangaben

      IV.3.3) Bedingungen für den Erhalt von Ausschreibungs- und ergänzenden Unterlagen bzw. der Beschreibung
      Schlusstermin für die Anforderung von Unterlagen oder die Einsichtnahme: 27.10.2014

      IV.3.4) Schlusstermin für den Eingang der Angebote oder Teilnahmeanträge
      28.10.2014 - 12:00

      IV.3.6) Sprache(n), in der (denen) Angebote oder Teilnahmeanträge verfasst werden können
      Englisch.



      Contract notice

      Services
      Directive 2004/18/EC

      Section I: Contracting authority

      I.1) Name, addresses and contact point(s)
      Contact point(s): For the attention of: Telephone: E-mail: University of Sheffield Floor 5, The Arts Tower, Western Bank https://in-tendhost.co.uk/sheffield Mark Richards S10 2TNSheffield UNITED KINGDOM +44 1142224204 MTZnKGxjXWJbbF5tOm1iX2BgY19mXihbXShvZQ==

      Internet address(es):
      General address of the contracting authority: www.sheffield.ac.ukAddress of the buyer profile: https://in-tendhost.co.uk/sheffieldFurther information can be obtained from: The above mentioned contact point(s)
      Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
      Tenders or requests to participate must be sent to: The above mentioned contact point(s)
      I.2) Type of the contracting authority
      Body governed by public law

      I.3) Main activity
      Education

      I.4) Contract award on behalf of other contracting authorities
      The contracting authority is purchasing on behalf of other contracting authorities: no

      Section II: Object of the contract

      II.1) Description

      II.1.1) Title attributed to the contract by the contracting authority:
      213/MR Appointment of Mechanical Engineer for CHP scheme at the University of Sheffield.

      II.1.2) Type of contract and location of works, place of delivery or of performance
      Services
      Service category No 1: Maintenance and repair services
      Main site or location of works, place of delivery or of performance: University of Sheffield.
      NUTS code UKE32

      II.1.3) Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
      The notice involves a public contract

      II.1.4) Information on framework agreement

      II.1.5) Short description of the contract or purchase(s)
      The University of Sheffield is installing a CHP system, and requires the services of a Mechanical Engineer who will act as lead on this prestigious project.
      This procurement is being advertised under the Accelerated Restricted procedure. This is a two part process with a 10 day pre-qualification questionnaire (PQQ) stage, followed by a 10 day ITT (invitation to tender) stage. Potential suppliers are invited to express an interest in the project and submit their PQQ submission. If they are successful at PQQ stage they will be invited to tender.
      The full technical specification will be available in the Invitation to tender documents that will be sent to you if you are successful in passing the pre-qualification stage. There is no obligation to tender if you subsequently find that you are unable to meet the full specification.
      Expressions of interest can only be accepted through the University's e-tendering system https://in-tendhost.co.uk/SheffieldThe closing date for return of PQQ documents is 28.10.2014 at 12:00 noon (UK time) through the in-tend system.
      Any questions in relation to this tendering exercise must only be raised via the Intend system.

      II.1.6) Common procurement vocabulary (CPV)
      71333000 - KA01, 09323000

      II.1.7) Information about Government Procurement Agreement (GPA)
      The contract is covered by the Government Procurement Agreement (GPA): yes

      II.1.8) Lots
      This contract is divided into lots: no

      II.1.9) Information about variants
      Variants will be accepted: yes

      II.2) Quantity or scope of the contract

      II.2.1) Total quantity or scope:
      Appointment for Mechanical Engineer to design and oversee installation of CHP scheme.

      II.2.2) Information about options

      II.2.3) Information about renewals

      II.3) Duration of the contract or time limit for completion
      Section III: Legal, economic, financial and technical information

      III.1) Conditions relating to the contract

      III.1.1) Deposits and guarantees required:
      As per tender documents.

      III.1.2) Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
      As per tender documents.

      III.1.3) Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
      Joint and several liability.

      III.1.4) Other particular conditions

      III.2) Conditions for participation

      III.2.1) Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
      Information and formalities necessary for evaluating if the requirements are met: As per tender documents.

      III.2.2) Economic and financial ability
      Information and formalities necessary for evaluating if the requirements are met: As per tender documents.
      Minimum level(s) of standards possibly required: As per tender documents.

      III.2.3) Technical capacity
      Information and formalities necessary for evaluating if the requirements are met:
      As per tender documents.
      Minimum level(s) of standards possibly required:
      As per tender documents.

      III.2.4) Information about reserved contracts

      III.3) Conditions specific to services contracts

      III.3.1) Information about a particular profession

      III.3.2) Staff responsible for the execution of the service
      Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: no

      Section IV: Procedure

      IV.1) Type of procedure

      IV.1.1) Type of procedure
      Accelerated restricted
      Justification for the choice of accelerated procedure: Justification for acceleration is due to urgent need to put in place an alternative heating solution as current source is non functional and time is of the essence to find a sustainable alternative due to lead times for key equipment and works.

      IV.1.2) Limitations on the number of operators who will be invited to tender or to participate
      Envisaged minimum number 4: and maximum number 8
      Objective criteria for choosing the limited number of candidates: As per tender documents.

      IV.1.3) Reduction of the number of operators during the negotiation or dialogue

      IV.2) Award criteria

      IV.2.1) Award criteria
      The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

      IV.2.2) Information about electronic auction
      An electronic auction will be used: no

      IV.3) Administrative information

      IV.3.1) File reference number attributed by the contracting authority:
      213/MR

      IV.3.2) Previous publication(s) concerning the same contract
      no

      IV.3.3) Conditions for obtaining specifications and additional documents or descriptive document
      Time limit for receipt of requests for documents or for accessing documents: 27.10.2014
      Payable documents: no

      IV.3.4) Time limit for receipt of tenders or requests to participate
      28.10.2014 - 12:00

      IV.3.5) Date of dispatch of invitations to tender or to participate to selected candidates

      IV.3.6) Language(s) in which tenders or requests to participate may be drawn up
      English.

      IV.3.7) Minimum time frame during which the tenderer must maintain the tender

      IV.3.8) Conditions for opening of tenders
      Date: 28.10.2014 - 12:30
      Place: University of Sheffield.
      Persons authorised to be present at the opening of tenders: yes
      Additional information about authorised persons and opening procedure: Procurement manager.

      Section VI: Complementary information

      VI.1) Information about recurrence
      This is a recurrent procurement: no

      VI.2) Information about European Union funds
      The contract is related to a project and/or programme financed by European Union funds: no

      VI.3) Additional information

      VI.4) Procedures for appeal

      VI.4.1) Body responsible for appeal procedures

      VI.4.2) Lodging of appeals
      Precise information on deadline(s) for lodging appeals: The contracting authority will incorporate a minimum 10 day standstill period at the point information on the award of contract is communicated to tenders. This period allows unsuccessful tenders seek a further debriefing before the contract is entered into. If an appeal regarding the award of contract cannot be resolved, the Public Contracts regulations 2006 (as amended) provide for aggrieved parties to take action in the High Court (England, Wales and Northern Ireland). Any such action should be brought promptly (generally within 3 months).

      VI.4.3) Service from which information about the lodging of appeals may be obtained

      VI.5) Date of dispatch of this notice:
      17.10.2014

    © European Union, http://ted.europa.eu
    • Protected by Copyscape

  • Gewährleistung

    competitionline übernimmt keine Verantwortung für Fehler, Auslassungen, Unterbrechungen, Löschungen, Mängel oder Verzögerungen im Betrieb oder bei Übertragung von Inhalten. competitionline übernimmt keine Verantwortung für Einbußen oder Schäden, die aus der Verwendung der Internetseiten, aus der Verwendung von Nutzerinhalten oder von Inhalten Dritter, die aus den Internetseiten oder über den Service gepostet oder an Nutzer übertragen werden, oder aus Interaktionen zwischen Nutzer und Internetseiten (online oder offline) resultieren. Bitte lesen Sie hierzu unsere Nutzungsbedingungen.

INFO-BOX

Ausschreibung veröffentlicht 22.10.2014
Zuletzt aktualisiert 17.11.2014
Wettbewerbs-ID 2-182339 Status Kostenpflichtig
Seitenaufrufe 49

Seitenanfang